Brentford · West London
Sliding Gates Brentford: Respecting Period Frontages
On a period frontage, sliding gates Brentford residents install should respect the existing wall and railings rather than dominate them. Modern Gates supplies and fits made-to-measure gates from our Hayes, West London base, with manual or automated operation. For older homes and conservation-sensitive streets, appearance and available opening space deserve equal attention.
- Measured on site
- Supply & fit in 14–28 days
- Steel & iron, made to measure
01
Planning sliding gates Brentford frontages can accommodate
Brentford’s character changes from the historic homes around The Butts to terraces near the High Street and newer riverside development. Where a period home has an existing driveway, a sliding gate can preserve parking space because it travels along the boundary rather than swinging across the entrance. That can be useful on a short driveway or where turning space is limited.
The important question is where the gate goes when open: it still needs sufficient clear space beside the entrance. A sloping driveway may suit a sliding arrangement, but the gate’s travel route needs checking separately. Before changing walls, posts or railings, establish whether conservation-area controls or listed-building consent affect your property; a made-to-measure gate does not remove the need for any required permission.
02
Let the house guide the metalwork and finish
For an older Brentford property, consider the proportions of the windows, existing railings and boundary wall before choosing the gate’s appearance. Steel and iron gates are available with powder-coated finishes, while cedar timber is an optional finish. A restrained colour can help the entrance sit alongside older brickwork without becoming the frontage’s main feature.
Our made-to-measure sliding gates use a steel chassis, with each leaf made for the measured opening. If the property also has a separate foot entrance, matching pedestrian gates can carry the same colour, finish and hardware across the boundary, rather than leaving two unrelated designs side by side.
Planning a gate in Brentford?
We measure your opening on site so your price is exact. Booking takes 3 quick steps.
03
Daily access without a swinging gate leaf
Manual operation may be all you need, or you can choose motors for an automated sliding gate. Remotes, app access and intercoms are available options. Think about how you actually arrive home: whether you approach directly from the road, turn into a short entrance or need to admit visitors while indoors.
An intercom is optional, not a requirement of automation. Discuss visitor access alongside the gate layout so the arrangement suits both drivers and people arriving on foot. Where a straight sliding route is difficult, turn and slide gates offer a different approach, following a turning track around a corner; their space requirements must be confirmed at survey.
04
From a Brentford site survey to fitting day
Request a site survey online in three quick steps. We measure on site, discuss tracked or cantilever layouts and establish the opening arrangement before making the gate to measure and fitting it. Bring up any planning restrictions at this stage, along with your preferences for the finish, motors and intercom. The supply-and-fit lead time is 14–28 days; discuss how this fits your plans when enquiring.
Pricing is calculated using width × height × a square-metre rate through the website’s product calculators. Choose Delivery only or Supply and fit, depending on what you need. If you are comparing sliding gate installers in Brentford, check that you are comparing the same dimensions, finish and access options, rather than treating every gate specification as equivalent.
05
Looking after an entrance you already have
An existing gate that becomes noisy, hesitates or catches does not automatically need replacing. Modern Gates offers gate repairs and maintenance, so you can enquire about a problem before committing to a new entrance. Keep the travel route clear of leaves and loose debris, and avoid forcing a gate that has jammed.
For enquiries about sliding gates near Brentford, call 020 3576 4733. Our base is at 66 Delamere Road, Hayes, UB4 0NN. Explain whether you need a new gate, help with an existing installation or advice on manual versus automated operation so the enquiry starts with the right priorities.
Browse our collections
Questions from Brentford homeowners
Can I install a sliding gate at a period home near The Butts?
Potentially, provided the entrance has a suitable travel route and the proposal meets any relevant planning requirements. Check your property’s conservation-area or listed status before altering the gate, posts, walls or railings. A site survey establishes the physical layout, but does not replace planning advice or consent.
Will a sliding gate work on my short Brentford driveway?
It can help because the leaf does not swing into your parking space. However, it needs room alongside the opening to retract. The survey checks that space, the entrance dimensions and whether a tracked or cantilever layout is suitable.
What happens if there is not enough straight boundary space?
A conventional sliding gate may not be suitable. A turn and slide gate follows a turning track around a corner and may offer an alternative, but its layout and space requirements need checking during the survey.
Can I have an electric sliding gate without an intercom?
Yes. Motors and intercoms are separate options, so you can choose automation without an intercom. Remotes and app access can also be discussed when specifying how you want to operate the gate.
How much do sliding gates in Brentford cost, and how long does fitting take?
Prices use width × height × a square-metre rate, shown in the website’s product calculators. Select Delivery only or Supply and fit and compare your chosen specification. The supply-and-fit lead time is 14–28 days; this is the overall lead time, not the duration of work on site.
Can you help with a sliding gate that no longer opens properly?
Modern Gates offers gate repairs and maintenance. Call 020 3576 4733 and describe what happens when you try to operate it, including any noise, catching or intermittent movement. Do not force a stuck gate.
Ready for a gate made for your opening?
Measured on site. Made for your opening. Fitted to last.