Hayes · West London
Driveway Gates Hayes: Planned Around Your Modern Home
Driveway gates Hayes homeowners choose for a new-build should complement the house without complicating the parking. Modern Gates makes steel and iron gates to measure, with manual or automated operation and optional intercoms. Based in Hayes, we measure your entrance on site so the design starts with the space you actually have.
- Measured on site
- Supply & fit in 14–28 days
- Steel & iron, made to measure
Supply & fit
14–28 days
01
Driveway gates Hayes homeowners can plan into a new frontage
A modern entrance works best when the gate, parking spaces and route to the front door are considered together. Hayes has newer development around Hayes Town and the station alongside established suburban housing towards Hayes End. A gate that looks right on a broad frontage may need a different opening arrangement on a shorter drive or beside a shared access.
For a new-build or remodelled home, think beyond the opening width. Where will a second car stand? Can someone reach the front door while a vehicle is parked? Will planned paving or boundary work change the finished levels? Raising these points at the survey helps make your driveway gates in Hayes part of the overall layout rather than a late addition.
02
Choose the movement first, then the finish
Short driveways and tight turns can make made-to-measure sliding gates worth considering: the leaf moves along the boundary instead of swinging across the parking area. Sufficient space is still needed for it to travel, and tracked or cantilever layouts are discussed at the survey. Where there is room for an opening arc, single and double-leaf swing gates offer another approach; the direction of opening needs to suit both the driveway and its surroundings.
If a straight sliding route is difficult, turn and slide driveway gates follow a turning track around a corner. The survey confirms the layout and space required. Across the options, powder-coated steel or iron provides the main material choice, with cedar timber available as an optional finish. For contemporary homes, consider how the gate's colour and proportions relate to the windows, brickwork and boundary rather than choosing the entrance in isolation.
Planning a gate in Hayes?
We measure your opening on site so your price is exact. Booking takes 3 quick steps.
03
Make everyday access part of the design
Manual gates keep operation straightforward, while motors allow automated opening. Neither choice should be made without considering how you use the entrance: arriving by car, leaving on foot and receiving visitors can each call for a different access arrangement. Sliding gates can pair with remotes, app access and intercoms; discuss the combination you want during the survey.
An intercom is optional, so you can plan for visitor communication or choose a gate without one. Intercoms and access control are particularly worth discussing before a new frontage is finished, rather than leaving access decisions until afterwards. Our guide to automatic gates for modern homes in West London provides a broader starting point if automation is central to your plans.
04
From an online survey request to a fitted entrance
Request a site survey online in three quick steps. We then measure on site, establish the opening arrangement and discuss materials, manual or automated operation, and whether you want an intercom. Your gate is made to measure and then fitted. For a new-build, flag any unfinished paving or boundary work so the measurements and intended finished layout can be discussed together.
The stated supply-and-fit lead time is 14–28 days; confirm the timing for your order before coordinating other work. Website product calculators price gates using width × height × a square-metre rate, with Delivery only or Supply and fit options. If you are comparing driveway gate installers in Hayes, check which option you are looking at so a delivery-only figure is not mistaken for a fitted price.
05
A local contact for repairs and maintenance
A finished entrance still needs attention over time. Changes in movement, a gate catching the ground or an access-control problem are reasons to arrange an assessment rather than keep forcing the gate to work. Modern Gates offers gate repairs and maintenance, as well as new made-to-measure installations.
If you are looking for driveway gates near Hayes, our base is at 66 Delamere Road, Hayes, UB4 0NN. Call 020 3576 4733 to discuss a new entrance or an existing gate issue. For repairs, describing whether the gate is manual or automated and what has changed gives a useful starting point for the conversation.
Browse our collections
Questions from Hayes homeowners
When should I arrange a survey for gates at my new-build in Hayes?
Request a survey while you are coordinating the driveway and boundary layout. Tell us about any paving, posts or boundary work that is not yet finished, as changes to levels or the opening can affect the gate arrangement. We measure on site before making your gate.
Which gate layout suits a short driveway?
A sliding gate can suit a short driveway because it does not swing into the parking space, but it needs room to travel along the boundary. A turn and slide gate follows a corner on a turning track. The survey establishes whether either layout fits your entrance.
Can I choose a modern finish without making the entrance look too stark?
Yes. Powder-coated steel and iron gates can be considered alongside the colours and proportions of your house, while an optional cedar timber finish adds warmth. The opening arrangement and material choice can be discussed together at the survey.
How much do made-to-measure driveway gates cost?
Prices are calculated using width × height × a square-metre rate on the website's product calculators. Select Delivery only or Supply and fit when reviewing the options. Your on-site measurements establish the opening for the made-to-measure gate.
Do automated gates have to include an intercom?
No. Manual or automated operation and intercom or no intercom are separate choices. Discuss how household members and visitors will use the entrance so the access arrangement reflects your routine.
How long does supply and fitting take in Hayes?
Modern Gates' stated supply-and-fit lead time is 14–28 days. Confirm the schedule for your order, particularly if the gate installation needs to be coordinated with other work on a new-build or refurbished driveway.
Ready for a gate made for your opening?
Measured on site. Made for your opening. Fitted to last.